/* * Copyright (C) 2002-2013 The DOSBox Team * OPL2/OPL3 emulation library * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* * Originally based on ADLIBEMU.C, an AdLib/OPL2 emulation library by Ken Silverman * Copyright (C) 1998-2001 Ken Silverman * Ken Silverman's official web site: "http://www.advsys.net/ken" */ #include "dosbox_opl.h" // per-chip variables Bitu chip_num; op_type op[MAXOPERATORS]; Bits int_samplerate; Bit8u status; Bit32u opl_index; #if defined(OPLTYPE_IS_OPL3) Bit8u adlibreg[512]; // adlib register set (including second set) Bit8u wave_sel[44]; // waveform selection #else Bit8u adlibreg[256]; // adlib register set Bit8u wave_sel[22]; // waveform selection #endif // vibrato/tremolo increment/counter Bit32u vibtab_pos; Bit32u vibtab_add; Bit32u tremtab_pos; Bit32u tremtab_add; static fltype recipsamp; // inverse of sampling rate static Bit16s wavtable[WAVEPREC*3]; // wave form table // vibrato/tremolo tables static Bit32s vib_table[VIBTAB_SIZE]; static Bit32s trem_table[TREMTAB_SIZE*2]; static Bit32s vibval_const[BLOCKBUF_SIZE]; static Bit32s tremval_const[BLOCKBUF_SIZE]; // vibrato value tables (used per-operator) static Bit32s vibval_var1[BLOCKBUF_SIZE]; static Bit32s vibval_var2[BLOCKBUF_SIZE]; //static Bit32s vibval_var3[BLOCKBUF_SIZE]; //static Bit32s vibval_var4[BLOCKBUF_SIZE]; // vibrato/trmolo value table pointers static Bit32s *vibval1, *vibval2, *vibval3, *vibval4; static Bit32s *tremval1, *tremval2, *tremval3, *tremval4; // key scale level lookup table static const fltype kslmul[4] = { 0.0, 0.5, 0.25, 1.0 // -> 0, 3, 1.5, 6 dB/oct }; // frequency multiplicator lookup table static const fltype frqmul_tab[16] = { 0.5,1,2,3,4,5,6,7,8,9,10,10,12,12,15,15 }; // calculated frequency multiplication values (depend on sampling rate) static fltype frqmul[16]; // key scale levels static Bit8u kslev[8][16]; // map a channel number to the register offset of the modulator (=register base) static const Bit8u modulatorbase[9] = { 0,1,2, 8,9,10, 16,17,18 }; // map a register base to a modulator operator number or operator number #if defined(OPLTYPE_IS_OPL3) static const Bit8u regbase2modop[44] = { 0,1,2,0,1,2,0,0,3,4,5,3,4,5,0,0,6,7,8,6,7,8, // first set 18,19,20,18,19,20,0,0,21,22,23,21,22,23,0,0,24,25,26,24,25,26 // second set }; static const Bit8u regbase2op[44] = { 0,1,2,9,10,11,0,0,3,4,5,12,13,14,0,0,6,7,8,15,16,17, // first set 18,19,20,27,28,29,0,0,21,22,23,30,31,32,0,0,24,25,26,33,34,35 // second set }; #else static const Bit8u regbase2modop[22] = { 0,1,2,0,1,2,0,0,3,4,5,3,4,5,0,0,6,7,8,6,7,8 }; static const Bit8u regbase2op[22] = { 0,1,2,9,10,11,0,0,3,4,5,12,13,14,0,0,6,7,8,15,16,17 }; #endif // start of the waveform static Bit32u waveform[8] = { WAVEPREC, WAVEPREC>>1, WAVEPREC, (WAVEPREC*3)>>2, 0, 0, (WAVEPREC*5)>>2, WAVEPREC<<1 }; // length of the waveform as mask static Bit32u wavemask[8] = { WAVEPREC-1, WAVEPREC-1, (WAVEPREC>>1)-1, (WAVEPREC>>1)-1, WAVEPREC-1, ((WAVEPREC*3)>>2)-1, WAVEPREC>>1, WAVEPREC-1 }; // where the first entry resides static Bit32u wavestart[8] = { 0, WAVEPREC>>1, 0, WAVEPREC>>2, 0, 0, 0, WAVEPREC>>3 }; // envelope generator function constants static fltype attackconst[4] = { (fltype)(1/2.82624), (fltype)(1/2.25280), (fltype)(1/1.88416), (fltype)(1/1.59744) }; static fltype decrelconst[4] = { (fltype)(1/39.28064), (fltype)(1/31.41608), (fltype)(1/26.17344), (fltype)(1/22.44608) }; void operator_advance(op_type* op_pt, Bit32s vib) { op_pt->wfpos = op_pt->tcount; // waveform position // advance waveform time op_pt->tcount += op_pt->tinc; op_pt->tcount += (Bit32s)(op_pt->tinc)*vib/FIXEDPT; op_pt->generator_pos += generator_add; } void operator_advance_drums(op_type* op_pt1, Bit32s vib1, op_type* op_pt2, Bit32s vib2, op_type* op_pt3, Bit32s vib3) { Bit32u c1 = op_pt1->tcount/FIXEDPT; Bit32u c3 = op_pt3->tcount/FIXEDPT; Bit32u phasebit = (((c1 & 0x88) ^ ((c1<<5) & 0x80)) | ((c3 ^ (c3<<2)) & 0x20)) ? 0x02 : 0x00; Bit32u noisebit = rand()&1; Bit32u snare_phase_bit = (((Bitu)((op_pt1->tcount/FIXEDPT) / 0x100))&1); //Hihat Bit32u inttm = (phasebit<<8) | (0x34<<(phasebit ^ (noisebit<<1))); op_pt1->wfpos = inttm*FIXEDPT; // waveform position // advance waveform time op_pt1->tcount += op_pt1->tinc; op_pt1->tcount += (Bit32s)(op_pt1->tinc)*vib1/FIXEDPT; op_pt1->generator_pos += generator_add; //Snare inttm = ((1+snare_phase_bit) ^ noisebit)<<8; op_pt2->wfpos = inttm*FIXEDPT; // waveform position // advance waveform time op_pt2->tcount += op_pt2->tinc; op_pt2->tcount += (Bit32s)(op_pt2->tinc)*vib2/FIXEDPT; op_pt2->generator_pos += generator_add; //Cymbal inttm = (1+phasebit)<<8; op_pt3->wfpos = inttm*FIXEDPT; // waveform position // advance waveform time op_pt3->tcount += op_pt3->tinc; op_pt3->tcount += (Bit32s)(op_pt3->tinc)*vib3/FIXEDPT; op_pt3->generator_pos += generator_add; } // output level is sustained, mode changes only when operator is turned off (->release) // or when the keep-sustained bit is turned off (->sustain_nokeep) void operator_output(op_type* op_pt, Bit32s modulator, Bit32s trem) { if (op_pt->op_state != OF_TYPE_OFF) { op_pt->lastcval = op_pt->cval; Bit32u i = (Bit32u)((op_pt->wfpos+modulator)/FIXEDPT); // wform: -16384 to 16383 (0x4000) // trem : 32768 to 65535 (0x10000) // step_amp: 0.0 to 1.0 // vol : 1/2^14 to 1/2^29 (/0x4000; /1../0x8000) op_pt->cval = (Bit32s)(op_pt->step_amp*op_pt->vol*op_pt->cur_wform[i&op_pt->cur_wmask]*trem/16.0); } } // no action, operator is off void operator_off(op_type* /*op_pt*/) { } // output level is sustained, mode changes only when operator is turned off (->release) // or when the keep-sustained bit is turned off (->sustain_nokeep) void operator_sustain(op_type* op_pt) { Bit32u num_steps_add = op_pt->generator_pos/FIXEDPT; // number of (standardized) samples for (Bit32u ct=0; ctcur_env_step++; } op_pt->generator_pos -= num_steps_add*FIXEDPT; } // operator in release mode, if output level reaches zero the operator is turned off void operator_release(op_type* op_pt) { // ??? boundary? if (op_pt->amp > 0.00000001) { // release phase op_pt->amp *= op_pt->releasemul; } Bit32u num_steps_add = op_pt->generator_pos/FIXEDPT; // number of (standardized) samples for (Bit32u ct=0; ctcur_env_step++; // sample counter if ((op_pt->cur_env_step & op_pt->env_step_r)==0) { if (op_pt->amp <= 0.00000001) { // release phase finished, turn off this operator op_pt->amp = 0.0; if (op_pt->op_state == OF_TYPE_REL) { op_pt->op_state = OF_TYPE_OFF; } } op_pt->step_amp = op_pt->amp; } } op_pt->generator_pos -= num_steps_add*FIXEDPT; } // operator in decay mode, if sustain level is reached the output level is either // kept (sustain level keep enabled) or the operator is switched into release mode void operator_decay(op_type* op_pt) { if (op_pt->amp > op_pt->sustain_level) { // decay phase op_pt->amp *= op_pt->decaymul; } Bit32u num_steps_add = op_pt->generator_pos/FIXEDPT; // number of (standardized) samples for (Bit32u ct=0; ctcur_env_step++; if ((op_pt->cur_env_step & op_pt->env_step_d)==0) { if (op_pt->amp <= op_pt->sustain_level) { // decay phase finished, sustain level reached if (op_pt->sus_keep) { // keep sustain level (until turned off) op_pt->op_state = OF_TYPE_SUS; op_pt->amp = op_pt->sustain_level; } else { // next: release phase op_pt->op_state = OF_TYPE_SUS_NOKEEP; } } op_pt->step_amp = op_pt->amp; } } op_pt->generator_pos -= num_steps_add*FIXEDPT; } // operator in attack mode, if full output level is reached, // the operator is switched into decay mode void operator_attack(op_type* op_pt) { op_pt->amp = ((op_pt->a3*op_pt->amp + op_pt->a2)*op_pt->amp + op_pt->a1)*op_pt->amp + op_pt->a0; Bit32u num_steps_add = op_pt->generator_pos/FIXEDPT; // number of (standardized) samples for (Bit32u ct=0; ctcur_env_step++; // next sample if ((op_pt->cur_env_step & op_pt->env_step_a)==0) { // check if next step already reached if (op_pt->amp > 1.0) { // attack phase finished, next: decay op_pt->op_state = OF_TYPE_DEC; op_pt->amp = 1.0; op_pt->step_amp = 1.0; } op_pt->step_skip_pos_a <<= 1; if (op_pt->step_skip_pos_a==0) op_pt->step_skip_pos_a = 1; if (op_pt->step_skip_pos_a & op_pt->env_step_skip_a) { // check if required to skip next step op_pt->step_amp = op_pt->amp; } } } op_pt->generator_pos -= num_steps_add*FIXEDPT; } typedef void (*optype_fptr)(op_type*); optype_fptr opfuncs[6] = { operator_attack, operator_decay, operator_release, operator_sustain, // sustain phase (keeping level) operator_release, // sustain_nokeep phase (release-style) operator_off }; void change_attackrate(Bitu regbase, op_type* op_pt) { Bits attackrate = adlibreg[ARC_ATTR_DECR+regbase]>>4; if (attackrate) { fltype f = (fltype)(pow(FL2,(fltype)attackrate+(op_pt->toff>>2)-1)*attackconst[op_pt->toff&3]*recipsamp); // attack rate coefficients op_pt->a0 = (fltype)(0.0377*f); op_pt->a1 = (fltype)(10.73*f+1); op_pt->a2 = (fltype)(-17.57*f); op_pt->a3 = (fltype)(7.42*f); Bits step_skip = attackrate*4 + op_pt->toff; Bits steps = step_skip >> 2; op_pt->env_step_a = (1<<(steps<=12?12-steps:0))-1; Bits step_num = (step_skip<=48)?(4-(step_skip&3)):0; static Bit8u step_skip_mask[5] = {0xff, 0xfe, 0xee, 0xba, 0xaa}; op_pt->env_step_skip_a = step_skip_mask[step_num]; #if defined(OPLTYPE_IS_OPL3) if (step_skip>=60) { #else if (step_skip>=62) { #endif op_pt->a0 = (fltype)(2.0); // something that triggers an immediate transition to amp:=1.0 op_pt->a1 = (fltype)(0.0); op_pt->a2 = (fltype)(0.0); op_pt->a3 = (fltype)(0.0); } } else { // attack disabled op_pt->a0 = 0.0; op_pt->a1 = 1.0; op_pt->a2 = 0.0; op_pt->a3 = 0.0; op_pt->env_step_a = 0; op_pt->env_step_skip_a = 0; } } void change_decayrate(Bitu regbase, op_type* op_pt) { Bits decayrate = adlibreg[ARC_ATTR_DECR+regbase]&15; // decaymul should be 1.0 when decayrate==0 if (decayrate) { fltype f = (fltype)(-7.4493*decrelconst[op_pt->toff&3]*recipsamp); op_pt->decaymul = (fltype)(pow(FL2,f*pow(FL2,(fltype)(decayrate+(op_pt->toff>>2))))); Bits steps = (decayrate*4 + op_pt->toff) >> 2; op_pt->env_step_d = (1<<(steps<=12?12-steps:0))-1; } else { op_pt->decaymul = 1.0; op_pt->env_step_d = 0; } } void change_releaserate(Bitu regbase, op_type* op_pt) { Bits releaserate = adlibreg[ARC_SUSL_RELR+regbase]&15; // releasemul should be 1.0 when releaserate==0 if (releaserate) { fltype f = (fltype)(-7.4493*decrelconst[op_pt->toff&3]*recipsamp); op_pt->releasemul = (fltype)(pow(FL2,f*pow(FL2,(fltype)(releaserate+(op_pt->toff>>2))))); Bits steps = (releaserate*4 + op_pt->toff) >> 2; op_pt->env_step_r = (1<<(steps<=12?12-steps:0))-1; } else { op_pt->releasemul = 1.0; op_pt->env_step_r = 0; } } void change_sustainlevel(Bitu regbase, op_type* op_pt) { Bits sustainlevel = adlibreg[ARC_SUSL_RELR+regbase]>>4; // sustainlevel should be 0.0 when sustainlevel==15 (max) if (sustainlevel<15) { op_pt->sustain_level = (fltype)(pow(FL2,(fltype)sustainlevel * (-FL05))); } else { op_pt->sustain_level = 0.0; } } void change_waveform(Bitu regbase, op_type* op_pt) { #if defined(OPLTYPE_IS_OPL3) if (regbase>=ARC_SECONDSET) regbase -= (ARC_SECONDSET-22); // second set starts at 22 #endif // waveform selection op_pt->cur_wmask = wavemask[wave_sel[regbase]]; op_pt->cur_wform = &wavtable[waveform[wave_sel[regbase]]]; // (might need to be adapted to waveform type here...) } void change_keepsustain(Bitu regbase, op_type* op_pt) { op_pt->sus_keep = (adlibreg[ARC_TVS_KSR_MUL+regbase]&0x20)>0; if (op_pt->op_state==OF_TYPE_SUS) { if (!op_pt->sus_keep) op_pt->op_state = OF_TYPE_SUS_NOKEEP; } else if (op_pt->op_state==OF_TYPE_SUS_NOKEEP) { if (op_pt->sus_keep) op_pt->op_state = OF_TYPE_SUS; } } // enable/disable vibrato/tremolo LFO effects void change_vibrato(Bitu regbase, op_type* op_pt) { op_pt->vibrato = (adlibreg[ARC_TVS_KSR_MUL+regbase]&0x40)!=0; op_pt->tremolo = (adlibreg[ARC_TVS_KSR_MUL+regbase]&0x80)!=0; } // change amount of self-feedback void change_feedback(Bitu chanbase, op_type* op_pt) { Bits feedback = adlibreg[ARC_FEEDBACK+chanbase]&14; if (feedback) op_pt->mfbi = (Bit32s)(pow(FL2,(fltype)((feedback>>1)+8))); else op_pt->mfbi = 0; } void change_frequency(Bitu chanbase, Bitu regbase, op_type* op_pt) { // frequency Bit32u frn = ((((Bit32u)adlibreg[ARC_KON_BNUM+chanbase])&3)<<8) + (Bit32u)adlibreg[ARC_FREQ_NUM+chanbase]; // block number/octave Bit32u oct = ((((Bit32u)adlibreg[ARC_KON_BNUM+chanbase])>>2)&7); op_pt->freq_high = (Bit32s)((frn>>7)&7); // keysplit Bit32u note_sel = (adlibreg[8]>>6)&1; op_pt->toff = ((frn>>9)&(note_sel^1)) | ((frn>>8)¬e_sel); op_pt->toff += (oct<<1); // envelope scaling (KSR) if (!(adlibreg[ARC_TVS_KSR_MUL+regbase]&0x10)) op_pt->toff >>= 2; // 20+a0+b0: op_pt->tinc = (Bit32u)((((fltype)(frn<>6]*kslev[oct][frn>>6]); op_pt->vol = (fltype)(pow(FL2,(fltype)(vol_in * -0.125 - 14))); // operator frequency changed, care about features that depend on it change_attackrate(regbase,op_pt); change_decayrate(regbase,op_pt); change_releaserate(regbase,op_pt); } void enable_operator(Bitu regbase, op_type* op_pt, Bit32u act_type) { // check if this is really an off-on transition if (op_pt->act_state == OP_ACT_OFF) { Bits wselbase = regbase; if (wselbase>=ARC_SECONDSET) wselbase -= (ARC_SECONDSET-22); // second set starts at 22 op_pt->tcount = wavestart[wave_sel[wselbase]]*FIXEDPT; // start with attack mode op_pt->op_state = OF_TYPE_ATT; op_pt->act_state |= act_type; } } void disable_operator(op_type* op_pt, Bit32u act_type) { // check if this is really an on-off transition if (op_pt->act_state != OP_ACT_OFF) { op_pt->act_state &= (~act_type); if (op_pt->act_state == OP_ACT_OFF) { if (op_pt->op_state != OF_TYPE_OFF) op_pt->op_state = OF_TYPE_REL; } } } void adlib_init(Bit32u samplerate) { Bits i, j, oct; int_samplerate = samplerate; generator_add = (Bit32u)(INTFREQU*FIXEDPT/int_samplerate); memset((void *)adlibreg,0,sizeof(adlibreg)); memset((void *)op,0,sizeof(op_type)*MAXOPERATORS); memset((void *)wave_sel,0,sizeof(wave_sel)); for (i=0;i=0;i--) { frqmul[i] = (fltype)(frqmul_tab[i]*INTFREQU/(fltype)WAVEPREC*(fltype)FIXEDPT*recipsamp); } status = 0; opl_index = 0; // create vibrato table vib_table[0] = 8; vib_table[1] = 4; vib_table[2] = 0; vib_table[3] = -4; for (i=4; i(VIBTAB_SIZE*FIXEDPT_LFO/8192*INTFREQU/int_samplerate); vibtab_pos = 0; for (i=0; i -0.5/6 to 0) for (i=14; i<41; i++) trem_table_int[i] = -i+14; // downwards (26 to 0 -> 0 to -1/6) for (i=41; i<53; i++) trem_table_int[i] = i-40-26; // upwards (1 to 12 -> -1/6 to -0.5/6) for (i=0; i>1);i++) { wavtable[(i<<1) +WAVEPREC] = (Bit16s)(16384*sin((fltype)((i<<1) )*PI*2/WAVEPREC)); wavtable[(i<<1)+1+WAVEPREC] = (Bit16s)(16384*sin((fltype)((i<<1)+1)*PI*2/WAVEPREC)); wavtable[i] = wavtable[(i<<1) +WAVEPREC]; // alternative: (zero-less) /* wavtable[(i<<1) +WAVEPREC] = (Bit16s)(16384*sin((fltype)((i<<2)+1)*PI/WAVEPREC)); wavtable[(i<<1)+1+WAVEPREC] = (Bit16s)(16384*sin((fltype)((i<<2)+3)*PI/WAVEPREC)); wavtable[i] = wavtable[(i<<1)-1+WAVEPREC]; */ } for (i=0;i<(WAVEPREC>>3);i++) { wavtable[i+(WAVEPREC<<1)] = wavtable[i+(WAVEPREC>>3)]-16384; wavtable[i+((WAVEPREC*17)>>3)] = wavtable[i+(WAVEPREC>>2)]+16384; } // key scale level table verified ([table in book]*8/3) kslev[7][0] = 0; kslev[7][1] = 24; kslev[7][2] = 32; kslev[7][3] = 37; kslev[7][4] = 40; kslev[7][5] = 43; kslev[7][6] = 45; kslev[7][7] = 47; kslev[7][8] = 48; for (i=9;i<16;i++) kslev[7][i] = (Bit8u)(i+41); for (j=6;j>=0;j--) { for (i=0;i<16;i++) { oct = (Bits)kslev[j+1][i]-8; if (oct < 0) oct = 0; kslev[j][i] = (Bit8u)oct; } } } } void adlib_write(Bitu idx, Bit8u val) { Bit32u second_set = idx&0x100; adlibreg[idx] = val; switch (idx&0xf0) { case ARC_CONTROL: // here we check for the second set registers, too: switch (idx) { case 0x02: // timer1 counter case 0x03: // timer2 counter break; case 0x04: // IRQ reset, timer mask/start if (val&0x80) { // clear IRQ bits in status register status &= ~0x60; } else { status = 0; } break; #if defined(OPLTYPE_IS_OPL3) case 0x04|ARC_SECONDSET: // 4op enable/disable switches for each possible channel op[0].is_4op = (val&1)>0; op[3].is_4op_attached = op[0].is_4op; op[1].is_4op = (val&2)>0; op[4].is_4op_attached = op[1].is_4op; op[2].is_4op = (val&4)>0; op[5].is_4op_attached = op[2].is_4op; op[18].is_4op = (val&8)>0; op[21].is_4op_attached = op[18].is_4op; op[19].is_4op = (val&16)>0; op[22].is_4op_attached = op[19].is_4op; op[20].is_4op = (val&32)>0; op[23].is_4op_attached = op[20].is_4op; break; case 0x05|ARC_SECONDSET: break; #endif case 0x08: // CSW, note select break; default: break; } break; case ARC_TVS_KSR_MUL: case ARC_TVS_KSR_MUL+0x10: { // tremolo/vibrato/sustain keeping enabled; key scale rate; frequency multiplication int num = idx&7; Bitu base = (idx-ARC_TVS_KSR_MUL)&0xff; if ((num<6) && (base<22)) { Bitu modop = regbase2modop[second_set?(base+22):base]; Bitu regbase = base+second_set; Bitu chanbase = second_set?(modop-18+ARC_SECONDSET):modop; // change tremolo/vibrato and sustain keeping of this operator op_type* op_ptr = &op[modop+((num<3) ? 0 : 9)]; change_keepsustain(regbase,op_ptr); change_vibrato(regbase,op_ptr); // change frequency calculations of this operator as // key scale rate and frequency multiplicator can be changed #if defined(OPLTYPE_IS_OPL3) if ((adlibreg[0x105]&1) && (op[modop].is_4op_attached)) { // operator uses frequency of channel change_frequency(chanbase-3,regbase,op_ptr); } else { change_frequency(chanbase,regbase,op_ptr); } #else change_frequency(chanbase,base,op_ptr); #endif } } break; case ARC_KSL_OUTLEV: case ARC_KSL_OUTLEV+0x10: { // key scale level; output rate int num = idx&7; Bitu base = (idx-ARC_KSL_OUTLEV)&0xff; if ((num<6) && (base<22)) { Bitu modop = regbase2modop[second_set?(base+22):base]; Bitu chanbase = second_set?(modop-18+ARC_SECONDSET):modop; // change frequency calculations of this operator as // key scale level and output rate can be changed op_type* op_ptr = &op[modop+((num<3) ? 0 : 9)]; #if defined(OPLTYPE_IS_OPL3) Bitu regbase = base+second_set; if ((adlibreg[0x105]&1) && (op[modop].is_4op_attached)) { // operator uses frequency of channel change_frequency(chanbase-3,regbase,op_ptr); } else { change_frequency(chanbase,regbase,op_ptr); } #else change_frequency(chanbase,base,op_ptr); #endif } } break; case ARC_ATTR_DECR: case ARC_ATTR_DECR+0x10: { // attack/decay rates int num = idx&7; Bitu base = (idx-ARC_ATTR_DECR)&0xff; if ((num<6) && (base<22)) { Bitu regbase = base+second_set; // change attack rate and decay rate of this operator op_type* op_ptr = &op[regbase2op[second_set?(base+22):base]]; change_attackrate(regbase,op_ptr); change_decayrate(regbase,op_ptr); } } break; case ARC_SUSL_RELR: case ARC_SUSL_RELR+0x10: { // sustain level; release rate int num = idx&7; Bitu base = (idx-ARC_SUSL_RELR)&0xff; if ((num<6) && (base<22)) { Bitu regbase = base+second_set; // change sustain level and release rate of this operator op_type* op_ptr = &op[regbase2op[second_set?(base+22):base]]; change_releaserate(regbase,op_ptr); change_sustainlevel(regbase,op_ptr); } } break; case ARC_FREQ_NUM: { // 0xa0-0xa8 low8 frequency Bitu base = (idx-ARC_FREQ_NUM)&0xff; if (base<9) { Bits opbase = second_set?(base+18):base; #if defined(OPLTYPE_IS_OPL3) if ((adlibreg[0x105]&1) && op[opbase].is_4op_attached) break; #endif // regbase of modulator: Bits modbase = modulatorbase[base]+second_set; Bitu chanbase = base+second_set; change_frequency(chanbase,modbase,&op[opbase]); change_frequency(chanbase,modbase+3,&op[opbase+9]); #if defined(OPLTYPE_IS_OPL3) // for 4op channels all four operators are modified to the frequency of the channel if ((adlibreg[0x105]&1) && op[second_set?(base+18):base].is_4op) { change_frequency(chanbase,modbase+8,&op[opbase+3]); change_frequency(chanbase,modbase+3+8,&op[opbase+3+9]); } #endif } } break; case ARC_KON_BNUM: { if (idx == ARC_PERC_MODE) { #if defined(OPLTYPE_IS_OPL3) if (second_set) return; #endif if ((val&0x30) == 0x30) { // BassDrum active enable_operator(16,&op[6],OP_ACT_PERC); change_frequency(6,16,&op[6]); enable_operator(16+3,&op[6+9],OP_ACT_PERC); change_frequency(6,16+3,&op[6+9]); } else { disable_operator(&op[6],OP_ACT_PERC); disable_operator(&op[6+9],OP_ACT_PERC); } if ((val&0x28) == 0x28) { // Snare active enable_operator(17+3,&op[16],OP_ACT_PERC); change_frequency(7,17+3,&op[16]); } else { disable_operator(&op[16],OP_ACT_PERC); } if ((val&0x24) == 0x24) { // TomTom active enable_operator(18,&op[8],OP_ACT_PERC); change_frequency(8,18,&op[8]); } else { disable_operator(&op[8],OP_ACT_PERC); } if ((val&0x22) == 0x22) { // Cymbal active enable_operator(18+3,&op[8+9],OP_ACT_PERC); change_frequency(8,18+3,&op[8+9]); } else { disable_operator(&op[8+9],OP_ACT_PERC); } if ((val&0x21) == 0x21) { // Hihat active enable_operator(17,&op[7],OP_ACT_PERC); change_frequency(7,17,&op[7]); } else { disable_operator(&op[7],OP_ACT_PERC); } break; } // regular 0xb0-0xb8 Bitu base = (idx-ARC_KON_BNUM)&0xff; if (base<9) { Bits opbase = second_set?(base+18):base; #if defined(OPLTYPE_IS_OPL3) if ((adlibreg[0x105]&1) && op[opbase].is_4op_attached) break; #endif // regbase of modulator: Bits modbase = modulatorbase[base]+second_set; if (val&32) { // operator switched on enable_operator(modbase,&op[opbase],OP_ACT_NORMAL); // modulator (if 2op) enable_operator(modbase+3,&op[opbase+9],OP_ACT_NORMAL); // carrier (if 2op) #if defined(OPLTYPE_IS_OPL3) // for 4op channels all four operators are switched on if ((adlibreg[0x105]&1) && op[opbase].is_4op) { // turn on chan+3 operators as well enable_operator(modbase+8,&op[opbase+3],OP_ACT_NORMAL); enable_operator(modbase+3+8,&op[opbase+3+9],OP_ACT_NORMAL); } #endif } else { // operator switched off disable_operator(&op[opbase],OP_ACT_NORMAL); disable_operator(&op[opbase+9],OP_ACT_NORMAL); #if defined(OPLTYPE_IS_OPL3) // for 4op channels all four operators are switched off if ((adlibreg[0x105]&1) && op[opbase].is_4op) { // turn off chan+3 operators as well disable_operator(&op[opbase+3],OP_ACT_NORMAL); disable_operator(&op[opbase+3+9],OP_ACT_NORMAL); } #endif } Bitu chanbase = base+second_set; // change frequency calculations of modulator and carrier (2op) as // the frequency of the channel has changed change_frequency(chanbase,modbase,&op[opbase]); change_frequency(chanbase,modbase+3,&op[opbase+9]); #if defined(OPLTYPE_IS_OPL3) // for 4op channels all four operators are modified to the frequency of the channel if ((adlibreg[0x105]&1) && op[second_set?(base+18):base].is_4op) { // change frequency calculations of chan+3 operators as well change_frequency(chanbase,modbase+8,&op[opbase+3]); change_frequency(chanbase,modbase+3+8,&op[opbase+3+9]); } #endif } } break; case ARC_FEEDBACK: { // 0xc0-0xc8 feedback/modulation type (AM/FM) Bitu base = (idx-ARC_FEEDBACK)&0xff; if (base<9) { Bits opbase = second_set?(base+18):base; Bitu chanbase = base+second_set; change_feedback(chanbase,&op[opbase]); #if defined(OPLTYPE_IS_OPL3) // OPL3 panning op[opbase].left_pan = ((val&0x10)>>4); op[opbase].right_pan = ((val&0x20)>>5); #endif } } break; case ARC_WAVE_SEL: case ARC_WAVE_SEL+0x10: { int num = idx&7; Bitu base = (idx-ARC_WAVE_SEL)&0xff; if ((num<6) && (base<22)) { #if defined(OPLTYPE_IS_OPL3) Bits wselbase = second_set?(base+22):base; // for easier mapping onto wave_sel[] // change waveform if (adlibreg[0x105]&1) wave_sel[wselbase] = val&7; // opl3 mode enabled, all waveforms accessible else wave_sel[wselbase] = val&3; op_type* op_ptr = &op[regbase2modop[wselbase]+((num<3) ? 0 : 9)]; change_waveform(wselbase,op_ptr); #else if (adlibreg[0x01]&0x20) { // wave selection enabled, change waveform wave_sel[base] = val&3; op_type* op_ptr = &op[regbase2modop[base]+((num<3) ? 0 : 9)]; change_waveform(base,op_ptr); } #endif } } break; default: break; } } Bitu adlib_reg_read(Bitu port) { #if defined(OPLTYPE_IS_OPL3) // opl3-detection routines require ret&6 to be zero if ((port&1)==0) { return status; } return 0x00; #else // opl2-detection routines require ret&6 to be 6 if ((port&1)==0) { return status|6; } return 0xff; #endif } void adlib_write_index(Bitu port, Bit8u val) { opl_index = val; #if defined(OPLTYPE_IS_OPL3) if ((port&3)!=0) { // possibly second set if (((adlibreg[0x105]&1)!=0) || (opl_index==5)) opl_index |= ARC_SECONDSET; } #endif } static void OPL_INLINE clipit16(Bit32s ival, Bit16s* outval) { if (ival<32768) { if (ival>-32769) { *outval=(Bit16s)ival; } else { *outval = -32768; } } else { *outval = 32767; } } // be careful with this // uses cptr and chanval, outputs into outbufl(/outbufr) // for opl3 check if opl3-mode is enabled (which uses stereo panning) #undef CHANVAL_OUT #if defined(OPLTYPE_IS_OPL3) #define CHANVAL_OUT \ if (adlibreg[0x105]&1) { \ outbufl[i] += chanval*cptr[0].left_pan; \ outbufr[i] += chanval*cptr[0].right_pan; \ } else { \ outbufl[i] += chanval; \ } #else #define CHANVAL_OUT \ outbufl[i] += chanval; #endif void adlib_getsample(Bit16s* sndptr, Bits numsamples) { Bits i, endsamples; op_type* cptr; Bit32s outbufl[BLOCKBUF_SIZE]; #if defined(OPLTYPE_IS_OPL3) // second output buffer (right channel for opl3 stereo) Bit32s outbufr[BLOCKBUF_SIZE]; #endif // vibrato/tremolo lookup tables (global, to possibly be used by all operators) Bit32s vib_lut[BLOCKBUF_SIZE]; Bit32s trem_lut[BLOCKBUF_SIZE]; Bits samples_to_process = numsamples; for (Bits cursmp=0; cursmpBLOCKBUF_SIZE) endsamples = BLOCKBUF_SIZE; memset((void*)&outbufl,0,endsamples*sizeof(Bit32s)); #if defined(OPLTYPE_IS_OPL3) // clear second output buffer (opl3 stereo) if (adlibreg[0x105]&1) memset((void*)&outbufr,0,endsamples*sizeof(Bit32s)); #endif // calculate vibrato/tremolo lookup tables Bit32s vib_tshift = ((adlibreg[ARC_PERC_MODE]&0x40)==0) ? 1 : 0; // 14cents/7cents switching for (i=0;i=VIBTAB_SIZE) vibtab_pos-=VIBTAB_SIZE*FIXEDPT_LFO; vib_lut[i] = vib_table[vibtab_pos/FIXEDPT_LFO]>>vib_tshift; // 14cents (14/100 of a semitone) or 7cents // cycle through tremolo table tremtab_pos += tremtab_add; if (tremtab_pos/FIXEDPT_LFO>=TREMTAB_SIZE) tremtab_pos-=TREMTAB_SIZE*FIXEDPT_LFO; if (adlibreg[ARC_PERC_MODE]&0x80) trem_lut[i] = trem_table[tremtab_pos/FIXEDPT_LFO]; else trem_lut[i] = trem_table[TREMTAB_SIZE+tremtab_pos/FIXEDPT_LFO]; } if (adlibreg[ARC_PERC_MODE]&0x20) { //BassDrum cptr = &op[6]; if (adlibreg[ARC_FEEDBACK+6]&1) { // additive synthesis if (cptr[9].op_state != OF_TYPE_OFF) { if (cptr[9].vibrato) { vibval1 = vibval_var1; for (i=0;i=0; cur_ch--) { // skip drum/percussion operators if ((adlibreg[ARC_PERC_MODE]&0x20) && (cur_ch >= 6) && (cur_ch < 9)) continue; Bitu k = cur_ch; #if defined(OPLTYPE_IS_OPL3) if (cur_ch < 9) { cptr = &op[cur_ch]; } else { cptr = &op[cur_ch+9]; // second set is operator18-operator35 k += (-9+256); // second set uses registers 0x100 onwards } // check if this operator is part of a 4-op if ((adlibreg[0x105]&1) && cptr->is_4op_attached) continue; #else cptr = &op[cur_ch]; #endif // check for FM/AM if (adlibreg[ARC_FEEDBACK+k]&1) { #if defined(OPLTYPE_IS_OPL3) if ((adlibreg[0x105]&1) && cptr->is_4op) { if (adlibreg[ARC_FEEDBACK+k+3]&1) { // AM-AM-style synthesis (op1[fb] + (op2 * op3) + op4) if (cptr[0].op_state != OF_TYPE_OFF) { if (cptr[0].vibrato) { vibval1 = vibval_var1; for (i=0;iis_4op) { if (adlibreg[ARC_FEEDBACK+k+3]&1) { // FM-AM-style synthesis ((op1[fb] * op2) + (op3 * op4)) if ((cptr[0].op_state != OF_TYPE_OFF) || (cptr[9].op_state != OF_TYPE_OFF)) { if ((cptr[0].vibrato) && (cptr[0].op_state != OF_TYPE_OFF)) { vibval1 = vibval_var1; for (i=0;i